HP EliteBook 8470w Maintenance And Service Manual page 74

3. Remove the hard drive (3) from the hard drive bay.
4. If it is necessary to disassemble the hard drive, perform the following steps:
a. Remove the four Phillips PM3.0×3.0 screws (1) that secure the hard drive bracket to the
hard drive.
b. Remove the hard drive bracket (2) from the hard drive. The hard drive bracket and screws
are available in the Hard Drive Hardware Kit, spare part number 642774-001.
Reverse this procedure to reassemble and install the hard drive.
66 Chapter 4 Removal and replacement procedures