g.
Keyboard (see
h.
Base enclosure (see
i.
System board (see
j.
Heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2.
Lift the processor (2) straight up, and remove it.
NOTE:
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Keyboard on page
76)
Base enclosure on page
System board on page
System board on page
80)
97)
97)
Component replacement procedures
105