HP EliteBook 8470w Maintenance And Service Manual page 120

f. Remove the two Phillips PM2.0×3.0 screws (1) that secure the display hinge tube to the
display enclosure.
g. Release the display hinge tube (2) by sliding it away from the display enclosure.
h. Release the wireless antenna cables (3), display panel cable (4), and webcam/microphone
cable (5) from the display hinge tube, noting of the locations of the display cable guides (6)
at the left and right ends of the display hinge tube.
i. Remove the display hinge tube. The display hinge tube, display hinge inner covers, display
hinge outer covers, and display cable guides are available in the Display Hinge Cover Kit,
spare part number 686024-001.
The display hinges are available using spare part number 642782-001.
10. If it is necessary to replace the display panel:
a. Remove the four Phillips PM2.0×4.0 screws (1) that secure the display panel to the
display enclosure.
b. Remove the display panel (2) from the display enclosure. The display panel is available
using the following spare part numbers.
●
●
●
●
112 Chapter 4 Removal and replacement procedures
686047-001 — 14.0-in, LED, FLT, HD+, AntiGlare display panel
686046-001 — 14.0-in, LED, FLT, HD, AntiGlare display panel
684348-001 — 14.0-in, LED, SVA, HD+, AntiGlare display panel
684347-001 — 14.0-in, LED, SVA, HD, AntiGlare display panel