Select The Desired Programme/Fabric; Select The Temperature; Select The Desired Options - John Lewis JLWM1603 Instruction Manual

All indicators in the display will appear in this language
from now on.
Note:
If the undesired language has been set, press
contemporary "Spin" + "Options" buttons for about
3 seconds in order to change the language.
Follow the instructions as before.
Setting the time
You should set the time prior to the first wash and
when changing to and from daylight savings time.
See "Clock setting", Menu.
5. Select the desired
programme / fabric
Turn the selector dial, in order to select the desired
programme/fabric ("Cottons" in this case). The
relevant message will appear in the display.
The display will show the "End cycle time" of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The
"Start/Pause" button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
"End Cycle" relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
6. Select the desired
temperature
Press the "Temperature" button if you wish to select
a temperature value different from the one proposed
by the washing machine ( 90°C in this case) .
The message of the maximum available temperature
appears on the second row of the display (instead of
"cycle end at").
In the corner of the third row appears the indication of
the selected temperature.
6. Select the spin speed or the
Rinse Hold
.
Press the "Spin" button repeatedly button in order to
select the desired spin speed or No Spin "
Rinse Hold or the Night Cycle
relevant message will appear on the second row of the
display. The selected spin level will be shown on the
third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme
with the water still in the tub.

7. Select the desired options

Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during
the selection phase.
Note: Not all the options are compatible
between themselves. The uncompatible option
icons will disappear.
9. Select the "Delay start"
Before you start the programme, if you wish the
starting to be delayed, choose the "Delay start"
option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
13
or Night cycle
O O
" or the
options. The