Select The Desired Temperature And Spin Speed; Select The Desired Options; Select The Delay Start; Start The Programme - John Lewis JLWM 1410 Instruction Manual

Select the desired
temperature and spin
speed
Press button 5 button repeatedly in order to
set the temperature and button 6to change
the spin speed from the one proposed by
the washing machine.
The button 6 allows you also to choose
«No Spin» («0»), «Rinse Hold » or «Quiet»
function.
Select the desired
options
Press buttons 7and 8 to select the available
options. Depending on the programme,
different options can be selected together.
These must be selected after choosing the
desired programme and before pressing the
button 10. If an option which is not
compatible with the set wash programme is
selected, the red Start/Pause light flashes 3
times and the message Err is displayed for a
few seconds.
When the option is set, it will appear in the
relevant rectangle on the display or the
relevant symbol icon will be displayed.

Select the delay start

Before you start the programme, press
button 12 repeatedly to select the desired
delay. The set delay time value (up to 20
hours) will appear on the display for a few
seconds, then the duration of the
programme will appear again. The wash
programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up
to a maximum of 20 hours.
Selecting the delayed start
You must select this option after you have
set the programme and before you press the
«Start/Pause» button.
• Select the programme and the required
options.
• Select the delay start.
• Press button 10: the machine starts its
hourly count down. The programme will
start after the selected delay has expired.
Opening the door throughout the
delay time
During the period until the delayed start, the
door can be opened and laundry added:
• Press the button 10
• Put laundry in and close the door
• Press the button 10 again
The programme will start after the
countdown has expired.
Cancelling the delayed start
You can cancel the delay time at any
moment, before you press the «Start/
Pause» button.
• Press «Start/Pause» button.
• Press «Delay start» button once until the
symbol «0'» is displayed.
• Press button 10 again.
Changing the Delay Start Timer
It is only possible to change the Delay Start
by switching off the appliance: press button
2 before it takes effect and selecting again
the programme.

Start the programme

To start the selected programme, press the
button 10 ; the green pilot light stops
flashing. If you have selected a delay time,
the countdown will begin and will be shown
on the display.
To interrupt a programme which is running,
press button 10: the green pilot light starts
to flash. To restart the programme from the
point at which it was interrupted, press the
button 10 again. If an incorrect option is
selected, the red pilot light of button 10
15