Operating Sequence; Load The Laundry; Measure Out The Detergent; Measure Out The Fabric Softener - John Lewis JLWM1603 Instruction Manual

Operating Sequence

Before the first wash, we recommend that you run a cotton
cycle at 60°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.
WASHING 6 KG OF WHITE COTTON AT 90°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one
item at a time, shaking them out as much as possible.
Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked

3.Measure out the fabric softener

If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
.
.
12

4. Switch the machine on

Turn the selector dial to "Cottons" programme to
switch the machine on. To switch the appliance off turn
it to "Off".
Switching the machine on for
the first time.
Language
When switching on the appliance for the first time you
must set the language in which you want the indicators
in the display to appear.
Important!
If the display is not showing any language, the appliance
has already been switched on once. In such case, go to
the chapter "Change language" if you would like to
change the language setting.
Example:
1. Press the "Change" button until the desired
language appears in the display.
2. Press the "Exit" button to confirm the selection.