Onboard Leds; Serial Port Connectors (10-1 Pin Com) - Asus H61M-PRO User Manual

10. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
H61M-PRO
H61M-PRO Serial port (COM) Connector
The COM module is purchased separately.
1.8

Onboard LEDs

1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
H61M-PRO
H61M-PRO Onboard LED
ASUS H61M-PRO
COM
PIN 1
SB_PWR
ON OFF
Standby Power Powered Off
1-19