Saving Your Settings - Honeywell HCC484TP User Manual

4. Press the + or – buttons to increase/decrease the value of the
selected item.
Figure 9

Saving your Settings

First Method:
1. Press MENU for two seconds. The SETUP Menu is replaced
by one of two messages:
SAVE? displays when values have been changed. Selecting
SAVE exits Setup mode and saves your changes.
QUIT? displays when you have not changed any settings.
Selecting QUIT exits Setup mode without saving any changed
values.
2. Press + or – to select SAVE or QUIT and press MENU to exit
the Setup mode. Press the UP or DOWN buttons to cancel the
SAVE/QUIT and return to the SETUP MENU.
Second Method:
MENU, and select SAVE AND EXIT to save the changed settings
and exit the menu. Select EXIT to exit without saving the settings.
Rev 1.01
OSD Menu Controls
DOWN
When you are satisfied with your settings:
Select EXIT MENU on the SETUP MENU, press
UP
MENU
+
9 900.0512
07/06