Logging On - Nortel 1120E User Manual

Logging on

Follow this procedure to log on to the network. If the Centrex IP Client
Manager (CICM) is set up as part of a group of CICMs, you can choose
which CICM to connect to. After you select a gateway, the terminal directs
itself at that CICM and the Username screen appears.
If a firmware upgrade for the IP Phone is available, the system prompts you
to upgrade when you log on. If the firmware level is between the minimum
and maximum level set by the administrator, Yes and No options appear on
the soft keys. If the terminal is below the minimum level, the only option
available is Yes. You cannot log on until you perform the upgrade.
To perform an upgrade, see
Step
1
2
3
4
5
Copyright © 2006, Nortel Networks
.
Action
If the Selective Gateway Login feature is configured on your system,
navigate through the list to select the gateway.
When the gateway you want appears, press Ok, or start entering
your username.
If the Username screen appears when you start to enter your
username, the characters you already entered appear at the
beginning of the Username field.
If you make a mistake, press Clear to clear the field, and then enter
the user name again.
If your user name is too long for the display (longer than 15
characters), the digits scroll to the left and an ellipsis appears to
the left of the user name.
Press Ok, or press the send key.
The password screen appears.
Enter your password. For security, the password characters are
displayed as asterisks (*).
Carrier VoIP
Nortel IP Phone 1120E User Guide
NN10300-022 01.02 Standard
(I)SN09U 20 October 2006
"Performing a firmware upgrade" (page
19
67).
Nortel Networks Confidential