Table of Contents
Advertisement
Fine-tuning the image size and clarity
1.
Adjust the projected image to the size that
you need using the zoom ring.
2.
Then sharpen the image by rotating the focus
ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at
either the top or bottom. It occurs when the projector is not perpendicular to the
screen.
To correct this, besides adjusting the height of the projector, you will need to
manually correct it following one of these steps.
•
Using the remote control
Press
/
on the projector or remote control
to display the Keystone correction page. Press
to correct keystoning at the top of the
image. Press
bottom of the image.
•
Using the OSD menu
1.
Press MENU/EXIT and then press
DISPLAY
until the
2.
Press
to highlight Keystone and
press MODE/ENTER. The Keystone
correction page displays.
3.
Press
of the image or press
keystoning at the bottom of the image.
to correct keystoning at the
menu is highlighted.
to correct keystoning at the top
to correct
/
/ .
Press
/ .
Press
Operation
25
Advertisement
Table of Contents
