Cleaning The Media Guides And Media Path - Intermec EasyCoder 3400e User Manual

C d

Cleaning the Media Guides and Media Path

EasyCoder 3400e Bar Code Label Printer User's Manual
39
Helvetica CondensedHelvetica
8 Engage the printhead by turning the head lift lever counterclockwise
until the printhead locks.
9 If you are finished cleaning, replace the media cover.
You should clean the media guides and media path regularly to keep debris
off the media surface and printhead where irregularities can spoil print
quality or damage the printhead. Cleaning the guides also prevents the
media from skewing or improperly tracking as it travels through the paper
path which can result in smeared images and print off the side of the label.
Always clean the media guides immediately after a label jam in the printer.
To clean the media guides and media path
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Remove the media and ribbon (if necessary).
4 Pull down on the lower media guide to open up the media path.
P o
w e
r /D
a ta
A le
r t
E m
p ty
/P
a u
s e
F e
e d
/P
a u
s e
I n t e I n t e
r m e r m e
c c
3 4
0 0
Media
path
5 Use the cloth moistened with isopropyl alcohol to clean the upper and
lower media guides. Be sure to remove all traces of debris. Release the
lower media guide.
6 Remove all traces of dust, paper, and adhesive from the media path with
a soft bristle brush or vacuum.
7 Replace the media and ribbon.
8 If you are finished cleaning, replace the media cover.
Chapter 3— Maintaining the Printer
Upper media
guide
Lower
media
guide
3XXXU.035
37