Removing The Base Thermal Fuse - KitchenAid KHMS105E Service Manual

Microwave Oven Hood Combo Service Manual — LIT 4317216

REMOVING THE BASE THERMAL FUSE

WARNING
Personal Injury Hazard
Disconnect from the electrical supply be-
fore servicing the unit. Failure to do so
could result in death or electrical shock.
1. Disconnect the electrical supply to the
microwave oven.
BROWN & WHITE
THE BASE THERMAL FUSE
CLOSES @133˚F & RESETS @ 104˚F.
CONTROL
PANEL
MOUNTING
SCREW
WIRES
YELLOW
WIRE
2. Remove the two screws from the top of
the cabinet for the vent grille and remove
the grille (see the illustration on page 2-3).
3. Remove the control panel from the micro-
wave oven (see page 2-6 for the proce-
dure).
4. Remove the mounting screw from the base
thermal fuse and remove it.
5. Unplug the wire connectors from the base
thermal fuse terminals.
6. Install the new base thermal fuse and
then reassemble the microwave oven.
TAB
BASE
THERMAL
FUSE
2-11
Original 03/97
Page 2-11
SLOT