Clearing Memory Contents; Display Type - Icom IC-V80 Instruction Manual

6
MEMORY/CALL OPERATION

■ Clearing memory contents

The contents of programmed memories can be cleared
(erased).
q For only the U.S.A. version, select any mode other than
the weather channel mode.
w Push [FUNC](M), and then push [VFO/MR/CALL].
e Push [] or [] to select a channel to be cleared.
r Perform the following operation within 1.5 sec., otherwise
the transceiver returns to the memory mode without clear-
ing memory.
- Push [FUNC](M), and then momentarily push [VFO/MR/
CALL].
- Push [FUNC](M), and then push and hold [VFO/MR/
CALL] for 1 sec.
• The channel contents are cleared.
t Push [VFO/MR/CALL] to return to the previous mode.
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
27

■ Display type

During memory mode operation, the transceiver has 3 dis-
play types to suit your operating style.
Set the display type in the Initial Set mode. (p. 46)
"Frequency display"
Displays the programmed frequency.
"Channel number display"
Displays the memory channel num-
ber. Only programmed channels are
displayed, and modes other than the
memory mode cannot be selected.
• When the channel number display type is selected, only the follow-
ing functions can be performed.
- Scan function (p. 30)
- DTMF memory function (p. 35)
- The scan pause timer setting, the function key timer setting, the
LCD backlight setting, the VOX-related settings, the microphone
gain setting, and the DTMF TX key setting in the Set mode.
"Channel name display"
Displays the channel name you have
assigned. Only programmed chan-
nels are displayed.
• If no channel name is programmed, the programmed frequency
will be displayed.
• Push [MONI] to display the operating frequency.
- Out put power setting (p. 17)
- Key lock function (p. 18)