Dial-In Modem Mode; Serial Port Parameters - Belkin OmniView User Manual

In order to terminate a Telnet/SSH/RawTCP session in Terminal Server Mode, you may
use these three control key sequences (Ctrl-Z / Ctrl-X / Ctrl-C).
4.1.4.3

Dial-in Modem Mode

In this mode, the Serial Console assumes an external modem is attached to the serial port
and waits for a dial-in connection from a remote site. When a user dials-in using a terminal
application, the Serial Console will accept the connection and display the appropriate
prompt or menu for you that logged in.
4.1.4.4 Serial –to Serial Mode
In Please refer to section 4.3 for details for this mode.

4.1.5 Serial Port Parameters

To connect the serial device to the Serial Console serial port, the serial port parameters of
the Serial Console should match exactly to the requirements of the attached serial device.
P75598- Belkin OmniView Serial Console
34 / 66