Installing And Setting Up The Adapters - Belkin F5D4075 User Manual

INSTALLING AND SETTING UP THE ADAPTERS

SECTIONS
Table of Contents
Overview
Installation of the Powerline AV+ Networking Adapter takes only
seconds and does not require setting up long wires throughout
the house. Simply plug the units directly into any available wall
outlet and connect to any device with an Ethernet port. Users have
the option to randomly change the security password for their
powerline network.
Powerline AV+ Networking Adapter
1 2
Hardware Setup
the back of the Adapter.
3. Plug the power cable or wall adapter into the power connector
at the back of the Adapter.
4. Insert the power plug of your power cable or wall adapter directly into
a power outlet in the wall.
Note: Do not plug the device into a UPS or power strip with surge
protection as they may filter the powerline signal.
5. Repeat this process for the second Adapter.
4
3 4