Installing And Setting Up The Adapters - Belkin F5D4072 User Manual

Installing and Setting Up the Adapters

Overview
Installation of the Powerline AV Networking Adapter takes only seconds
and does not require setting up long wires throughout the house . Simply
plug the units directly into any available wall outlet and connect to any
device with an Ethernet port . Users have the option to randomly change
the security password for their powerline network .
Hardware Setup
1. Plug your network cable into the computer's RJ45 network adapter port.
2. Plug the other end of your network cable into the RJ45 port located at the
back of the Adapter .
3 . Plug the power cable or wall adapter into the power connector at the back of
the Adapter .
4 . Insert the power plug of your power cable or wall adapter directly into a
power outlet in the wall .
NOTE: Do not plug the device into a UPS or power strip with surge protection.
The Adapter has its own power filter for protection against surges.
MAN_F5D4072_v1011_PM00233-A.indd 4
4 4 4
4/3/08 4:39:01 PM