Asus A7V600-F User Manual page 47

11. System panel connector (20-pin PANEL1)
This connector accommodates several system front panel functions.
A7V600-F
®
A7V600-F Front Panel Audio Connector
• System Power LED Lead (2-pin PLED)
This 2-pin connector connects to the system power LED. The LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
• ATX Power Switch/Soft-off Switch Lead (2-pin PWR)
This connector connects a switch that controls the system power.
Pressing the power switch turns the system between ON and SLEEP,
or ON and SOFT OFF, depending on the BIOS or OS settings.
Pressing the power switch while in the ON mode for more than 4
seconds turns the system OFF.
• Reset Switch Lead (2- pin RESET)
This 2-pin connector connects to the case-mounted reset switch for
rebooting the system without turning-off the system power.
• Hard Disk Activity Lead (2-pin IDE_LED)
This connector supplies power to the hard disk activity LED. The read
or write activities of any device connected to the primary or secondary
IDE connector cause this LED to light up.
ASUS A7V600-F motherboard user guide
ATX Power
Power LED
Switch*
F_PANEL
HDLED Reset SW
2-23