Service Journal; Delivery Service; After The First 20 Hours - Husqvarna SG 13 B Operator's Manual

Action

Delivery service

1. Open packaging and make sure machine has not been damaged in
transport.
2. Where applicable, assembly accompanying components.
3. Check that machine design corresponds to customer order.
4. Check that right amount of oil is in engine and transmission.
5. Check and adjust air pressure in tires. (25 psi max.)
6. Check that working equipment is properly set.
7. Check drive pulleys and sprockets for alignment.
8. Check belts and chains for proper adjustment.
9. Lubricate the machine as described in the lubrication schedule.
10. Fill fuel tank and start engine.
11. Check that machine and working equipment do not move in neutral.
12. Check all operating instruments.
13. Check decals and information attached to unit.
14. Check engine speed (RPM), see Technical Data.
15. Check for leakage.
16. Inform the customer about:
The need and advantages of following the service schedule.
The need and advantages of leaving the machine for service every
300 hours.
The effects of service and maintaining a service journal on the
machine's resale value.
17. Fill in the sales papers, etc.

After the first 20 hours

1. Change engine oil.
2. Change oil in reduction gear, where applicable.
3. Check that belts and chains are properly adjusted.
4. Tighten screws and nuts.

SERVICE JOURNAL

Date, stamp, signature
Delivery service has
been carried out.
No remaining notes.
Certified:
HUSQVARNA
-51