Configuring Advanced Setting - Huawei EchoLife HG520 User Manual

Home gateway
Hide thumbs Also See for EchoLife HG520:
Table of Contents

Advertisement

User Manual
EchoLife HG520 Home Gateway
AP Mode: Wireless Bridge- listens and answers other APs
onlyAccess Point- Wireless Bridge also with AP functionality.
Bridge Restrict: Disabled- any AP will be granted access
Enabled- only selected APs (Max. 4) with specified MAC address will
be granted access
available AP for you to select.
Refresh: Re-scan the available AP.
Save/Apply: Save the configuration.

6.5 Configuring Advanced Setting

In most cases, HG520 work well with wireless default settings.
Modification is not recommended unless you are very familiar with
these parameters.
Channel: Select the appropriate channel from the provided
list to correspond with your network settings. All devices in
your wireless network must use the same channel in order to
function correctly. Default is 7.
Rate: The range is from 1 to 54Mbit/s. The data
transmission rate should be set according to the speed of
your wireless network. You can set one transmission speed,
or keep the default setting "Auto" to have the router
automatically detect the fastest possible data rate.
Basic Rate Set: Select the basic rate that wireless clients
must support.
Fragmentation: This value should remain at its default
setting of 2346. The range is 256-2346 bytes. This value
Enabled (Scan)- as above, but HG520 will scan
Huawei Technologies Proprietary
69
Chapter 6 Wireless Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents