Table of Contents
Advertisement
7. Gently push the free edge downwards until the module locks into
place.
If the memory module is not installed properly, your Joybook may not
boot properly.
8. Replace the cover.
40
Installing additional memory
9. Use a screwdriver to secure it with the screws.
10.Place the battery on its original position (1) and then slide the battery
retainer A to the to the lock
When you start Joybook, it will automatically test and configure the
new memory.
Battery retainer A
It is recommended that you go into BIOS to load setup defaults after
installing additional memory. For details, refer to
page
29.
position (2). Connect the AC adapter.
"Using BIOS setup" on
Advertisement
Table of Contents
