Explanation Of Lights; Preliminary Checks; Controls After Transport; Installing The Appliance - DeLonghi ESAM 5400 Instruction Manual

extra long coffee
(When you access the MENU: turn to
select).
B7. Aroma selection button
until the light corresponding to the type
of coffee you want to make comes on.
pre-ground coffee
extra-mild taste
mild taste
standard taste
strong taste
extra-strong taste
B8. B8. steam or hot water selection
button.
(When you access the MENU: press the
"ESC" button to exit from the selected
function and go back to the main
menu).
B9. P button to access the menu:

Explanation of lights

The "hot water" function is selected.
Manual rinse (activated by accessing
the menu with the P button)
Indicates the need to descale the
appliance.
The water tank is empty and must be
filled with fresh water.
The "temperature" light comes on when
the machine is warming up or cooling
down. It goes off when the correct
temperature is reached.
The "steam " function is selected.
The appliance is delivering two cups of
coffee (the "two cup" button has been
pressed).
An alarm is displayed (see "Explanation
of lights")..
The grounds container is full or missing
and must be emptied or inserted.
The filter is exhausted and must be
replaced.
Indicates the button to press to confirm
the choice in the menu.
Indicates the button to press to exit the
menu or selected function.

PRELIMINARY CHECKS

Controls after transport

: press
After removing the packaging, make sure the pro-
duct is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact the technical service centre.

Installing the appliance

Important!
When installing the appliance, respect the follo-
wing safety warnings:
• The appliance gives off heat.
Leave a free space of at least 3 cm around the
sides and back of the appliance and at least 15
cm at the top, otherwise the heat could be
trapped and damage the machine.
• Water penetrating the appliance could cause
damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water
it contains freezes.
Do not install the appliance in a room where
the temperature could drop below freezing
point.
• Arrange the power cable in such a way that it
cannot be damaged by sharp edges or contact
with hot surfaces (e.g. electric hot plates).

Connecting the appliance

Important! Check that the mains power
supply voltage corresponds to the value indicated
on the rating plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed and
correctly installed socket with a minimum current
rating of 10A only. If the power socket does not
match the plug on the appliance, have the socket
replaced with a suitable type by a qualified pro-
fessional.
27 27
GB