How To Set The Calendar Clock; How To Use The Chronograph - Oregon Scientific SL928D User Manual

TIME AND CALENDAR DISPLAY
Refer to (FIG. 4).

HOW TO SET THE CALENDAR CLOCK

Refer to (FIG. 5).
Note:
a. Clock in either 24-hour or 12-hour (with "a" and "p" indication) format.
b. Calendar year can be set between 2000 to 2099. The unit will automatically
recognize the day of the week.
c. Minute digit will be auto-advanced by one digit if second is reset after 30 sec.

HOW TO USE THE CHRONOGRAPH

Refer to (FIG. 6).
1. Press [ MODE ] to display the CHRONO mode.
2. To register a segment, press [LAP/RESET].
3. Press [ START ] to start counting. The stopwatch can count up to 23 hours, 59
minutes and 59.99 seconds before starting from zeros again.
4. Press [ STOP ] to stop counting. To resume, press [START]. A new lap count
will start.
5. Or press [ LAP/RESET ]. The last lap number will appear and the display will
freeze for five seconds. The [ CHRONO ] indicator will flash indicating the
stopwatch is still running in the background.
6. Press [ STOP ] to stop counting.
7. Repeat the last three steps to register other laps. The stopwatch can register up
to 100 laps.
8. Press [ LAP/RESET ] after stopping to clear the display and register another
segment.
Note:
a. The stopwatch can register up to 30 segments.
b. 30 segments share with total 100 lap memories.
3