Oregon Scientific SL928D User Manual page 4

c. The effective memory left for laps will be reduced as the number of registered
segments increased.
d. The free memory remained will be shown on the display when a segment is
registered.
e. Chronograph mode can be run at the background when the stopwatch is started
and go to the other display mode.
f. Stopwatch can still be operated of all segment on lap memory is being
used up.
HOW TO SELECT THE CHRONOGRAPH IN UNITS OF
HOURS, MINTUES OR SECONDS
Refer to (FIG. 7).
Note:
a. Four different chronograph units of display: hour:minute:second with 1/100
sec. resolution, second with 1/100 sec. resolution; hour with 1/100000 hr
resolution and minute with 1/1000 min resolution.
b. Different segment can have different chronograph unit of display.
c. Within each segment it is allowed only one single unit of display.
HOW TO RECALL CHRONOGRAPH RECORDS
Refer to (FIG. 8).
Note:
a. The last recorded segment will be displayed with its time and date stamp when
advance from chronograph mode.
b. Two beeping sounds will be heart to indicate the end of lap record for each
segment.
HOW TO ERASE CHRONOGRAPH RECORDS
Refer to (FIG. 9A / FIG. 9B).
Note: The record of the current running chronograpy cannot be deleted.
4