Load Cards
If you are using a manual feed
printer, skip this step and keep a
supply of blank cards close to
the printer. For printers with an
input hopper, continue with
these steps:
1.
Open the input hopper (a).
2.
Fan cards before placing
them into input hopper (b).
Insert magnetic stripe cards
with the stripe down and
toward the right-hand side of the input hopper.
3.
Close input hopper (c).
Load Print Ribbon
Load the ribbon when you install the printer
and when the ribbon runs out.
1.
Open the printer's top cover.
16
Install the Printer