The Driver Status Or Windows Print Queue Does Not Provide Expected Data - Polaroid 539957-020 Rev. A User Manual

The driver status or Windows print queue does not provide expected data

Problem
In the print queue
(Windows Print
Manager), print jobs
are shown as done and
are removed, when
they have not started
in the printer.
The Driver Sample Card
or mag stripe test cards
do not print.
The Ribbon Low light on
the printer and the
driver status do not
match.
In the print queue
(Windows Print
Manager), print jobs
show an error and are
removed without
printing.
The Driver Sample Card
or mag stripe test card
do not print.
A print job disappears
from the print queue,
but does not print.
The Eject SD260 device
appears in the Safely
Remove Hardware list.
The print job prints, but
remains in the print
queue.
100
Solution
The print queue shows jobs that Windows is still
tracking. Those jobs can be in the queue at the
printer, waiting for other jobs to complete
The "Enable bidirectional support" choice in Printer
Properties is unchecked. This must be checked to
allow printing from the driver.
The percent remaining that causes the printer Ribbon
Low light can be set using the Printer Manager. The
driver display cannot be changed. As a result, the
two indicators can show different data.
The print queue shows jobs that Windows is still
tracking. Those jobs can be in the queue at the
printer, waiting for other jobs to complete.
The "Print directly to printer" choice in Printer
Properties is checked. Uncheck the value to allow
printing of the driver sample cards.
The printer USB cable was disconnected after the
application sent the job.
The USB adapter in the printer appears in the list. This
cannot be changed.
The printer might be shared with another PC. The
printer driver does not support sharing. Close the print
queue and open it again to clear it.
Troubleshooting