Site Requirements
Set up and use the printer in an
environment that meets the
following requirements.
• Provide space for the printer
and for clearance around the
printer. The printer
dimensions and clearance
area is shown in the table
below.
Printer
Model
P3500S
P3500S with
Smart Card
P5500S
Options such as a large output stacker and 200-card input hopper add height to the
printer. Additional clearance is required when using these options.
• Place the printer in an environment with temperatures ranging from 60° F to
95° F (15° C to 35° C).
• Use a single phase, 3-wire, grounded receptacle.
• Keep all dust, dirt, food, and liquids away from the printer.
• Keep paper and foreign materials off the printer.
• Place the printer on a sturdy, level surface.
• Place the printer away from direct sunlight.
• Do not place printer near heating ducts, fans, or other air vents.
• Do not use the printer for purposes other than the intended use.
• Prevent debris from entering the printer.
A
B
10.00
8.80
254
224
10.00
8.80
254
224
10.00
8.80
254
224
Dimensions (inches/mm)
C
D
4.00
6.85
102
174
4.00
6.85
102
174
4.00
6.85
102
174
E
F
4.00
15.37
4.00
102
390
4.00
21.21
4.00
102
539
4.00
21.21
4.00
102
539
G
102
102
102
11