Electrolux EDC67550W User Manual page 9

1 2 3
Delicate (Delicate)
For especially gentle drying of sensitive fab-
rics with the care label and for temperature-
sensitive textiles (e.g. acrylic, viscose). Pro-
gramme is executed with reduced heat. Del-
icate (Delicate) is only suitable for use with
loads of up to 3kg.
1. Press the Delicate (Delicate) button. The
corresponding pilot light comes on.
Dryness (Dryness)
Press the Dryness (Dryness) button repeat-
edly, to select the desired option. The rele-
vant light will light up. Laundry becomes dry-
er from MIN to MAX. Press the Dryness (Dry-
ness) button as many times as necessary
until the small light at the level of residual
dampness required is illuminated.
When the programme has finished the pilot
lights End is on.
Buzzer (Buzzer)
When the drying cycle has finished, an inter-
mittent audible signal will sound.
By depressing button Buzzer (Buzzer) the
acoustic signal is switched off in the following
cases:
• when selecting the programme
• when depressing the buttons
• when the programme selector dial is
turned to another position during the pro-
gramme or when you depress an option
button during the cycle
• at the end of the programme.
The corresponding light comes on
Delay (Delay)
This button allows you to delay the starting
of the programme by 3, 6 or 9 hours.
Press the button until the light relevant to the
desired delay lights up. This option must be
selected after having selected the pro-
gramme and before 3 6 9 pressing START/
PAUSE (START/PAUSE) to start the pro-
gramme.
The machine begins the countdown, which
is shown by the pilot lights. For example, if
you have chosen a 9-hour delay (pilot light 9h
lit), after 3 hours, 9h goes out and 6h lights
4
up; after 3 more hours, 6h goes out and 3h
lights up. When the 9 hours are over (pilot
light 3h off), the drying cycle begins.During
the delayed start period, it is not possible to
change the programme or the selected de-
lay. If you wish to do so, you must first cancel
everything by rotating the programme selec-
tor dial to position "O". Select the new pro-
gramme, the options and the delayed start,
then press START/PAUSE (START/PAUSE) .
If you wish to change only the options, this
can be done on condition that the new op-
tion(s) is(are) compatible with the pro-
gramme. Set the machine to PAUSE by de-
pressing the relevant button, select the new
option(s) and depress START/PAUSE
(START/PAUSE) button again.
If you wish to add some laundry while the
machine is performing the countdown, after
having done so and having closed the door,
press START/PAUSE (START/PAUSE)
again, in order to allow the machine to com-
plete the remaining countdown time.
Starting the programme
Press the START/PAUSE (START/PAUSE)
button. The relevant light will stop flash-
ing .The Programme is started. The indicator
lights of DRYING (DRYING) and COOLING
(COOLING) light up one after the other. All
drying programmes end with a 10 minute
cooling phase (light COOLING (COOLING) is
on). You may remove the laundry after this
phase.
Changing programme
To change a programme which is running,
first cancel it by turning the programme se-
lector dial to " O ". Select the new pro-
gramme and press the START/PAUSE
(START/PAUSE) button .
electrolux 9