Processor Fan Mounting Bracket; Screwing The Processor Fan Into The Mounting Bracket - Intel CoreTM 2 Duo Processor User Manual

Platform Setup
a. Mount the self-adhesive square metal bracket
CoolerMaster* box) on the bottom of the CRB underneath the processor. This
bracket lines up with the four holes making a square around the processor and
provides the nut for the fan screws to plug into.
Note: If there is more than one bracket provided in the CoolerMaster* box, use the bracket
with the appropriate length nut threads. These brackets correlate with the height of the
processor in the socket.
CRB.
Figure 18.

Processor Fan Mounting Bracket

b. Place the fan on top of the processor and screw it into the bracket as shown in
Figure
Figure 19.

Screwing the Processor Fan into the Mounting Bracket

c. Plug the fan connector into the motherboard. This connector is in coordinate H8
and labeled "CPUFAN". Any other fans that you wish to use can be connected to
"AUX FAN 0" and/or "AUX FAN 1". These are located next to "CPUFAN". These
connectors are shown in
June 2007
Order Number: 316639-002
Figure 19 shows how the bracket mounts to the bottom of the
19.
Figure
(Figure 18, found in the
20.
User's Manual
29