Static Color; Auto Programs; Edit Customs; Master/Slave - Chauvet Colorado 2 Zoom Tour User Manual

Static Color

Auto Programs

Edit Customs

Master/Slave

COLORado™ 2 Zoom Tour User Manual Rev. 01
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1. Go to the STAT main level.
2. Select the desired color, zoom, and strobe values on the programming level. For
example, R.255, G.210, B.230, W.200, Z.255, S.15. The strobe values are 0~20.
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to AUTO.
2. Select the desired auto (AT. 01~10) or custom program (PR. C1~10).
You cannot edit any of the auto programs (AT. 01~10). However, you can edit the
custom programs (PR. C1~10). See Edit Customs below for details.
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired custom program (PR.C1~10).
3. Select the desired scene (SC 01~30).
4. Select the desired color, zoom, or effect and the value for each (R.000~255),
(G.000~255), (B.000~255), (W.000~255), (Z.000~255), (S.00~20) (T.000~255), or
(F.000~255).
5. Repeat to change the different colors or effects.
6. Return to the SCENE level (step "3").
7. Repeat the settings of colors and effects for the other scenes.
The Master/Slave mode allows a group of COLORado™ 2 Zoom Tour's (the slave
products) to simultaneously duplicate the output of another COLORado™ 2 Zoom Tour
(the master product) without a DMX controller.
1. Set each of the slave products:
a. Go to RUN.
b. Select SLAV.
2. Set the master product:
a. Set the running mode to DMX as explained in
b. Select an auto or custom program as explained in Auto Programs above, or a
static mix of colors.
· The master product is the one that runs a program (whether Auto or Custom) or
Static Color mode.
· Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master
product.
· The master product should be the first product in the daisy chain.
Operation
DMX Control.
-11-