AMT Datasouth Accel-7450 User Manual page 43

COVER OPEN
JAM SENSOR

This error occurs if the front cover is opened and
causes the ONLINE lamp to blink.

Closing the front cover clears the error.

Press the ONLINE key to put the printer back
online (ONLINE lamp on steady).
CAUTION
The jam sensor is defective.
 Press the ONLINE key to clear the error.
 Press the EJECT/LOAD key to unload paper as
needed.
 Make sure the jam sensor on the tractor is clear of
paper pieces and is clean.
 Reload fanfold paper.
NOTE: The paper jam sensor may not function
properly if it is exposed to a direct light or
sunlight. Relocate the printer as needed.
- 43 -
ACCEL-7450
Never open the front cover during printing.
Press the ONLINE key first to stop printing
and then open the front cover.