Head adjustment lever
This lever sets the gap between the print head and the paper.
For most printing, the lever position should be to AUTO. This setting allows
the printer to measure the paper thickness and adjust the print head gap
automatically.
The print head gap can also be manually set for 1 to 7 part forms.
Special Key Functions
Special key functions are executed by pressing and holding the keys
indicated in the following table while simultaneously turning on the printer
power. Load paper first to avoid error indication.
Function
Initialization #1
ASCII self-test
Hex Dump
Character H printing mode
Pin testing
Alignments adjust
Adjust the tear off position
(For tractor paper)
HIGH IMPACT + LF+POWER
LF + POWER
SPEED + POWER
TEAR OFF + POWER
HIGH IMPACT + POWER
ENTER + RLF + POWER
Online state, press and hold the TEAR OFF key
three seconds.
- 27 -
ACCEL-7450
Key