Abit AH6E Pentium II User Manual page 28

3-6 Chapter 3
Note : The increase by 2.5% of the CPU speed is not a
standard feature of this product. It is only for use by
our development department to verify that the CPU is
able to work normally when CPU speed, operating
temperature and power supply are 2.5% higher or
lower than the standard values. This is to guarantee
product stability. We require the manufacturer of the
Clock Generator to meet the demands of our
development department and to add a TURBO
Frequency feature used for testing purposes by our
R&D department. Of course, you can use this feature
to test the stability of your own system, but after you
have tested the product, we recommend that you set it
back to its normal value in order to guarantee system
stability.
Attention: After setting up the parameters and you leave the
BIOS SETUP, and you have verified that the system
can be booted, do not press the Reset button or turn
off the power supply. Otherwise the BIOS will
not read correctly, the parameters will fail and you
™
must enter CPU SOFT MENU again to set up the
parameters all over again.