Abit AH6E Pentium II User Manual page 11

Installing the Mainboard
PN2(Pin 1-2) - Hardware Reset Connector
Attach the cable from the case's Reset switch to this connector. Press and
hold the reset button for at least one second to reset the system.
Pin number
1
2
PN1(Pin 13-14) - Hardware Suspend Switch (SMI Switch)
Attach the cable from the case's suspend switch (if there is one) to this switch.
Use this switch to enable/disable the power management function by hardware.
Pin number
13
14
PN1(Pin 1-2-3-4-5) - Keylock and Power LED Connector
Attach the case's keylock to the connector.
Pin number
1
2
3
4
5
Computer
Knowledge
Name or significance of signal
Ground
Reset input
Name or significance of signal
Ground
Suspend signal
Name or significance of signal
+5VDC
No connection
Ground
Keylock inhibit signal
Ground
The "keylock switch" is used to lock the computer's keyboard.
This disables the keyboard so that unauthorized persons cannot
use it. When this function is in use, you will need to use
the unlock key to activate the keyboard.
2-5