Pnp/Pci Configurations - Abit AT8 32X User Manual

BIOS Setup

3-7. PnP/PCI Configurations

Init Display First
Resources Controlled By
IRQ Resources
PCI/VGA Palette Snoop
PCI Latency Timer(CLK)
PIRQ_0 Use IRQ No.
PIRQ_1 Use IRQ No.
PIRQ_2 Use IRQ No.
PIRQ_3 Use IRQ No.
PIRQ_4 Use IRQ No.
PIRQ_5 Use IRQ No.
PIRQ_6 Use IRQ No.
PIRQ_7 Use IRQ No.
** PCI Express relative items **
Maximum Payload Size
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Init Display First:
This item selects which display slot to be initialized first when the system boots.
[PCI Slot]: When the system boots, it will first initialize PCI.
[PCIEx]: When the system boots, it will first initialize PCIE.
Resources Controlled By:
This item configures all of the boot and Plug-and-Play compatible devices.
[Auto]: The system will automatically detect the settings.
[Manual]: Choose the specific IRQ resources in the "IRQ Resources" menu.
IRQ Resources:
Click <Enter> key to enter its submenu:
This item sets each system interrupt to either [PCI Device] or [Reserved].
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
F6: Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
IRQ Resources
F6: Fail-Safe Defaults
PCI Slot
Auto
Press Enter
Disabled
32
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
4096
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Item Help
F7: Optimized Defaults
Item Help
F7: Optimized Defaults
3-23
User's Manual