2-8
5. Locate the DMS-59
in the package.
6. There are 3 connectors on the DMS-59
interconnect cable as shown in above
illustration:
Connector 1 is a DMS-59
Connector 2 is a DVI-I Female connector;
Connector 3 is a DVI-I Male connector.
7. Connect the DMS-59
the cable to the DMS-59
™
CrossFire
Edition graphics card.
AT8 32X
™
to interconnect cable
™
™
Male connector;
™
Male connector on
™
connector on the
8. Connect the DVI-I Male connector on the
cable to the DVI-I connector on the CrossFire
compatible PCI Express graphics card. Then
connect the DVI-I Female connector on the
cable to your monitor.
Chapter 2
™