Swap Floppy Drive - Abit LM6E Pentium II User Manual

3-12
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache. When the
external cache is enabled, the system works faster. The default is Enable.
CPU Level 2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC
checking function .
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard
will run a series of tests in order to check the system and its peripherals.
If the Quick power on self test feature is Enable, the BIOS will simplify
the test procedures in order to speed up the boot process. The default is
Enable.
Boot Sequence:
When the computer boots up, it can load the operating system from
floppy drive A:, hard disk drive C:, SCSI disk drive or CD-ROM. There
are many options for the boot sequence:
➤ A, C, SCSI
➤ C, A, SCSI
➤ C, CD-ROM, A
➤ CD-ROM, C, A
➤ D, A, SCSI ( At least 2 IDE HDD can be used )
➤ E, A, SCSI ( At least 3 IDE HDD can be used )
➤ F, A, SCSI ( At least 4 IDE HDD can be used )
➤ SCSI, A, C
➤ SCSI, C, A
➤ A, SCSI, C
➤ LS/ZIP, C

Swap Floppy Drive:

This item can be set as Enable or Disable.
When this feature is enabled, you don't need to open the computer case to
swap the position of floppy disk drive connectors. Drive A: can be set as
drive B:, and drive B: can be set as drive A:.
Chapter 3