Installation Of The Pentium Ii Cpu - Abit LM6E Pentium II User Manual

Installing the Motherboard

(4) Installation of the Pentium II CPU

1.
Mount the two black plastic pegs onto the motherboard. These pegs will
be used to attach the fan heat sink supports. Notice that one hole and
the base of one peg are larger than the other hole and peg base. Push
each peg into its hole firmly to the end until you hear it " click " into
place.
2.
Slide a black plastic support onto each end of the fan heat sink , making
sure that the hole and clip are on the outside edge of the support . Slide
each support toward the center of the processor until the support is
secured to the outside groove of the fan housing .
2-13