Abit SG-71 User Manual page 69

Introducing the BIOS
Midi Port Address
Three options are available: Disabled
MPU-401 I/O address in this item to meet the need for MIDI device requirement.
 Midi Port IRQ:
Two options are available: 5
this item to meet the need for game requirement.
Back to Integrated Peripherals Setup Menu Here:
Init Display First:
Two options are available: PCI Slot
one display card, you can choose either a PCI display card (PCI Slot) or an AGP display card (AGP) to
display the boot-up screen. If you have only installed one display card, the BIOS will detect which slot
(AGP or PCI) you installed it, and everything will be taken care of by the BIOS.
AGP Auto Calibration:
Two options are available: Enabled
auto calibration function to obtain the best performance.
IDECHO Access Interface:
Two options are available: PCI Bus
special designed bus to enhance the access performance.
IDECH1 Access Interface:
Two options are available: PCI Bus
EDB Bus. The EDB bus is SiS special designed bus to enhance the access performance.
USB0 Access Interface:
Two options are available: PCI Bus
EDB Bus. The EDB bus is SiS special designed bus to enhance the access performance.
USB1 Access Interface:
Two options are available: PCI Bus
EDB Bus. The EDB bus is SiS special designed bus to enhance the access performance.
USB2 Access Interface:
Two options are available: PCI Bus
EDB Bus. The EDB bus is SiS special designed bus to enhance the access performance.
USB2.0 Access Interface:
Two options are available: PCI Bus
EDB Bus. The EDB bus is SiS special designed bus to enhance the access performance.
330 300. Default setting is 330. You can choose the
10. The default setting is 10. You can choose the MIDI port IRQ in
AGP. The default setting is PCI Slot. When you install more than
Disabled. The default setting is Enabled. This will enable AGP
EDB Bus. The default setting is EDB Bus. The EDB bus is SiS
EDB Bus. The default setting is EDB Bus. The default setting is
EDB Bus. The default setting is EDB Bus. The default setting is
EDB Bus. The default setting is EDB Bus. The default setting is
EDB Bus. The default setting is EDB Bus. The default setting is
EDB Bus. The default setting is EDB Bus. The default setting is
4-19
User's Manual