Abit VL6 User Manual page 18

2-10
PN1 (Pin 1-2-3-4-5): Power LED Headers
and orientation.
PN1 (Pin 6-7): HDD LED Header
PN1 (Pin 8-9): Power on Switch Header
VL6
Figure 2-9. The definition of PN1 and PN2
pins
There is a specific orientation for pins 1
through 3. Insert the three-threaded power
LED cable to pins 1~3. Check to make sure
the correct pins go to the correct connectors
on the motherboard. If you install them in
the wrong direction, the power LED light
will not illuminate correctly.
Note: Watch the power LED pin position
Attach the cable from the case's front panel
HDD LED to this header. If you install it in
the wrong direction, the LED light will not
illuminate correctly.
Note: Watch the HDD LED pin position and
the orientation.
Attach the cable from the case's front panel
power switch to this header.
Chapter2