Abit VL6 User Manual page 14

2-6
(2A)/(2B)/(2C): FAN1, FAN2 & FAN3 header
Note: Watch the pin position and the orientation
(3) IR: IR Header (Infrared)
(4) WOM1: Wake On Modem Header
VL6
Attach the connector from the individual
CPU fan to the header named FAN1,
connector from the chassis fan to the header
FAN3 and attach the connector from the
power fan to FAN2 header.
You must attach the CPU fan to the
processor, or your processor will work
abnormally or may be damaged by
overheating. Also, if you want the computer
case's internal temperature to be kept steady
and not too high, you had better connect the
chassis fan to reach this goal.
There is a specific orientation for pins 1
through 5, attach the connector from the IR
KIT or IR device to the IR1 header (left row
only). This motherboard supports standard
IR transfer rates.
Note: Watch the pin position and the
orientation
If you have an internal modem adapter that
supports this feature, then you can connect
the specific cable from the internal modem
adapter to this header. This feature lets you
wake up your computer via remote control
through the modem.
Note: Watch the pin position and the
orientation
Chapter2