Using The Phone; Making A Call; Receiving A Call; Last Number Redial - Geemarc Jupiter 10 User Manual

USING THE PHONE

1 - MAKING A CALL

- Lift the handset.
The LCD will display the call timer as follows for example and the in use LED
will light:
00-18
- Use the dial keypad to dial the number. The digits being dialled will appear
on the LCD display at the same time. For example:
0 1 2 3 4 5 6 7 8 9
After about 3 seconds the LCD display will switch to the call timer mode.
- The Call Timer will stop when you replace the handset at the end of the call.
The LCD will revert back to the default mode after about 3 seconds.

2 - RECEIVING A CALL

When there is an incoming call, the Jupiter 10 will ring. Lift handset to answer the
call. The Call Timer will start soon after the call is answered and the in use LED
will light.

3 - LAST NUMBER REDIAL

/P
The unit can store for subsequent redial the last number that you called.
- To redial the number, lift the handset.
9