2. ACCESSORIES
The following installation parts are supplied. Use them as required.
Name and Shape
Q'ty
Installation manual
Operating manual
Remote controller cable
Connecting cable
Screw
(M4 × 16 mm)
Cable tie
Screw
(M4 × 14 mm)
Cable clamper
3. ELECTRICAL REQUIREMENT
When connecting the remote controller, use cable specified as follows:
Conductor size
Remote controller
0.33 mm
2
cable
(22AWG)
*We recommend that you purchase our service parts for the remote control-
ler cable. Contact service personnel to purchase this.
Application
This manual
1
Instruction book for operation
1
For connecting the remote controller
1
For connecting the remote controller
cable to the wall mounted type and
1
the floor type indoor unit
For installing the remote controller
2
For remote controller and remote
1
controller cable binding
For installing the remote controller
cable to the indoor unit
1
For installing the remote controller
cable to the indoor unit
1
Type
Remarks
Use sheathed
Polar 3 core
PVC cable
4. SELECTING AN INSTALLATION LOCATION
4.1. Dimensions
4-23/32 (120)
1-6/32
1-10/32
(30)
29/32
4.2. Name of parts
Press the button lightly with a finger. It may cause a failure if pressed with
excessive force.
(1)
(2)
(3)
(4)
(5)
(1) Display panel (with backlight)
(2) Screen switch button (Left)
(3) Menu button
(4) Cancel button
(5) Cursor button
-Note-
While the backlight is off by the automatic light off, the first button opera-
tion does not work, and the backlight illuminates. (The On/Off button is
excluded.)
While the backlight is set to [Off], it is effective from the first button opera-
tion.
7/32 (21.3)
(33.5)
(23)
11/32 (9)
6/32 (4.5)
Unit: in. (mm)
CAUTION
(6)
(7)
(8)
(9)
(6) Screen switch button (Right)
(7) Power indicator
(8) On/Off button
(9) Enter button
En-2