Table of Contents
Advertisement
HANDSET SETTINGS
5 - NETWORK FEATURES, FLASH TIME, DIAL PAUSE
1 - Press the
2 - Press the
(
on the display. The selected icon will flash on the display.
3 - Press the
4 - You can choose from the menu below:
1/5 1/2 : 1 For UK, 2 for France (CID features).
2/5 Tone/Pulse for dialling must be set to Tone.
3/5 A,B,C,D (Telephone network settings)
4/5 Flash time R key
5/5 Dial pause to insert a pause in the mumber
You can scroll into the menu by pressing the
the
(
) key to modify entries, press
5 - Press the
Network settings
You can choose between 4 network settings:
A Factory setting (default value), B, C, D
These settings are used to match the signal level when working on different
phone networks.
Note: The setting should be left to A
Flash time settings for
a) ***
b) ******
Dial pause settings
You can insert a pause time in a phone number after the first digit, the digits after
the pause time are dialled after a 3 seconds delay. Two settings are available to
use this feature Yes or No.
key.
) or the
(
key to select the
key to exit the menu.
. You can choose between 2 settings:
100 ms for United Kingdom
300 ms for France
15
) key to select the desired icon shown
icon.
key. Press the
to confirm modification.
(
) or
Advertisement
Table of Contents
