Setting Audio Input; Skipping Specified Inputs - Sharp Aquos LC-70LE951X Operation Manual

Useful viewing functions
Option
4:3 mode (DTV only)
The 4:3 mode allows you to select between "Full" and
"Normal".
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "4:3 mode".
Full Wide image without side bars.
Normal range keeping 4:3 or 16:9 aspect
Normal
ratio.
4:3 screen types
4:3 mode "Full"

Setting audio input

Option
Digital audio output
This function allows you to select the digital audio signal
type.
Go to "HOME" > "TV Menu" > "Setup" >
"Option" > "Terminal setting" > "Digital audio
output".
PCM To stereo audio system
To multi-channel Dolby Digital, DTS
Bitstream
audio system
48
Item
4:3 mode "Normal"
Item
Option
Audio select
When using the PC terminal or HDMI2 terminal, you
must select which terminal uses the AUDIO IN jack for
analogue audio input.
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Terminal setting" > "Audio select".
When selecting "HDMI2" from the "INPUT" menu
When connecting devices (including a
HDMI PC) with a HDMI cable to the HDMI2
terminal.
When connecting devices (including a
HDMI + PC) with a DVI/HDMI cable to the HDMI2
Analogue terminal and inputting analogue audio
signals from the AUDIO IN jack.
When selecting "PC" from the "INPUT" menu
When connecting devices with AV cable
Video to the PC terminal, display images
without audio.
When connecting a PC to the PC
terminal, and inputting analogue audio
Video + Audio
signals from the AUDIO IN jack.

Skipping specified inputs

Option
Input skip
This setting allows you to skip the inputs on the input
source selection operation.
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "Terminal setting" > "Input skip".
NOTE
• If you connect external equipment to an HDMI terminal which
you have set to be skipped, a notification message appears
on the display when a signal is received from the connected
external equipment. Press "?" to reset the related skipping
setting so that the input terminal becomes available.
Item
Item