Basic Adjustment; Picture Settings - Sharp Aquos LC-70LE951X Operation Manual

Basic adjustment

Picture settings

Go to "HOME" > "TV Menu" > "Setup" > "Picture".
CH list
: Select :Enter :Back
NOTE
• After selecting a menu such as "AV mode", "Clear Picture
Processing", "OPC", "Backlight", "Contrast", "Brightness",
"Colour", "Tint" and "Sharpness", you can adjust while
viewing more of the screen area by pressing ? to make the
menu smaller.
• For resetting all adjustment items to factory preset values,
press a/b to select "Reset", press ?, press a/b to select
"Yes", and then press ?.
Picture
AV mode
"AV mode" gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
Press a/b to select the desired mode, and then
press ?.
• You can also switch the mode on the "Picture" and "Audio"
menu screen by pressing #.
The TV automatically sets the appropriate
selection from the "AV mode" menu depending
AUTO
on the lighting conditions and the type of
programme watched.
STANDARD For a highly defined image in a normally bright room.
MOVIE For viewing a movie in a darkened room.
GAME (Standard/
For playing of video games.
High motion)
PC* 1 For PC.
Allows you to customise settings as desired.
USER
You can set the mode for each input source.
Produce realistic colour on the TV screen
x.v.Colour* 2
unlike any other signal.
For a clear-cut image emphasising high
DYNAMIC
contrast for sports viewing.
For a clear-cut image emphasising high
DYNAMIC (Fixed) contrast for sports viewing (the "Picture" and
"Audio" settings cannot be adjusted).
STANDARD (3D)
MOVIE (3D) Refer to page 78 for details.
GAME (3D)
Menu
Setup
Picture
[STANDARD]
AV mode
[STANDARD]
Clear Picture Processing
[Middle]
OPC
[Off]
Backlight
Item
NOTE
"PC" is available only when selecting "HDMI1", "HDMI2", "HDMI3",
*1
"HDMI4" or "PC" from the "INPUT" menu.
"x.v.Colour" is available only when accepting an "x.v.Colour" signal
*2
through an HDMI terminal.
• You can select a different "AV mode" item for each input
mode (for example, select "STANDARD" for TV input and
"DYNAMIC" for VIDEO input).
• If you select "AUTO", some selections in the "AV mode" menu
may not be automatically set.
• "Game type" mode can be set. Refer to "Game type" on page
38.
Picture
Clear Picture Processing
Processes noise included in broadcast signals to
improve picture quality.
Improves picture quality through Clear
High Picture Processing at a level above
"Middle".
Middle
Turn OFF the function for improving
Off picture quality through Clear Picture
Processing.
Picture
OPC
Automatically adjusts the brightness of the screen.
The brightness is fixed at the value set in
Off
"Backlight".
On Automatically adjusts.
Displays the OPC effect on the screen
On:Display while adjusting the brightness of the
screen.
NOTE
• When set to "On", the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
• When "Backlight" is adjusted, "OPC" is set to "Off".
Item
Item
37