Using A Pc; Setting Audio Input - Sharp AQUOS LE580X Series Operation Manual

<< Using a PC
Setting Audio Input
Audio Select HDMI
This function sets the terminal to output the computer audio.
The adjustment items vary depending on the input source. Select the input
source corresponding to the terminal connected to the PC and then adjust
the desired item.
To perform the operation, refer to "Devices" > "Video in" > "HDMI 3" >
"Audio Select".
HDMI 3
HDMI(Digital): Select this when the TV and PC are connected using an
HDMI-certified cable and audio is input via the same cable.
HDMI+Analog: Select this when the TV and PC are connected using a
HDMI-certified cable and the audio is input via INPUT 5 (L/R).
NOTE
When "Audio Select" is set to "HDMI+Analog", sound will not be
produced if you use only an HDMI-certified cable to connect HDMI-
compatible equipment. To produce sound, you should make an analog
audio connection.
If you want to connect HDMI-compatible equipment using only an
HDMI-certified cable, set "Audio Select" to "HDMI(Digital)".
"Audio Select" can only be set for the HDMI IN 3.
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
EN 8-1
>>