Preparing For The 3D Glasses; Part Names - Sharp Aquos LC-70LE951X Operation Manual

Enjoying 3D image viewing

Preparing for the 3D glasses

Part Names


Power button and LED indicator

Nose pad
NOTE
• The power turns off automatically when the 3D glasses are
not operated in standby for approximately 15 seconds
1
Power button
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV starts.
• When the power button is pressed for 2 or more
seconds with the power on, the power turns off.
• When paired, the power will turn off if the power button
is pressed for 2 or more seconds.
• When the 3D glasses are in 3D mode with the power on,
pressing the power button for less than 2 seconds will
turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power on,
pressing the power button for less than two seconds will
turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if the
power button is pressed for less than 2 seconds.
LED indicator
• When paired with the TV, the LED light blinks in green.
• When the power is turned on, the LED lights up in green
for 3 seconds.
• When in 3D mode, the LED blinks in green in 3-second
intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
• When the power is turned off, the LED lights up in red for
3 seconds.
NOTE
• When in low voltage mode:
− When in 3D mode, the LED blinks in green in
3-second intervals.
− When in 2D mode, the LED blinks in red in 3-second
intervals.
2
Nose pad mount
• The dedicated nose pad can be mounted here.
73