Appendix; Troubleshooting; Troubleshooting - Digital Broadcasting - Sharp Aquos LC-70LE951X Operation Manual

Appendix

Troubleshooting

Problem
• No power.
• The TV cannot be operated.
• Remote control unit does not
operate.
• Picture is cut off.
• Strange colour, light colour,
or dark colour, or colour
misalignment.
• Power is suddenly turned off.
• No picture.
• No sound.
• The TV sometimes makes a
cracking sound.
• AQUOS.NET top page cannot be
displayed.
• Some Internet functions used on a
PC are not available from the TV.
Troubleshooting – Digital broadcasting
Problem
• No picture or no sound.
• Block noise appears on the screen.
• DTV broadcasts cannot be
received.
• A specific channel cannot be
received.
• No broadcast now
82
• Is the AC cord disconnected?
• Check if you pressed < on the TV.
• When the power switch does not work, remove the power plug and insert it again, and
press < on the TV after waiting more than five seconds.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the TV after first turning off the power, or unplugging the
AC cord and re-plugging it in after one or two minutes.
• Are batteries inserted with polarity (e, f) aligned?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminating to the remote control sensor?
• Is the image position correct?
• Are screen mode adjustments (Wide mode) such as picture size made correctly? (Pages
47f48, 67 and 68).
• Adjust the picture tone (Pages 37f39).
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the "Colour system" setting (Pages 43 and 50).
• Check the "HDMI auto view" setting (Page 49).
• The TV's internal temperature has increased. Remove any objects blocking the vent or
clean.
• Is the "Sleep timer" set? Select "Off" from the "Sleep timer" menu (Page 41).
• Is "No signal off" or "No operation off" activated? (Page 41)
• Are connections to external equipment correct? (Pages 28f31)
• Is the correct input source selected? (Page 19)
• Is a non-compatible signal being input? (Page 69)
• Is the picture adjustment correct? (Pages 37f39)
• Is the antenna connected properly? (Page 9)
• Is the volume too low?
• If you do not clearly hear the sound for the visually impaired, go to "HOME" > "TV Menu"
> "Setup" > "Audio" > "Audio description setting" > "Mix level", and select the upper level
to turn up the volume.
• Make sure that headphones are not connected.
• Check if you pressed e on the remote control unit.
• Is the proper item selected in the "Audio select" menu when connecting devices to the
HDMI 2 terminal or the PC terminal? (Pages 29, 48 and 68)
• This is not a malfunction. This happens when the cabinet slightly expands and contracts
according to changes in temperature. This does not affect the TV's performance.
• Is the ETHERNET cable connected correctly? (Page 53)
• Check the settings of "Network setup". (Pages 52 – 55)
• The TV has only limited functions compared with regular PC browsers. (Page 57)
Error code
— • Is the correct input source selected? (Page 19)
— • Is the antenna pointing in the correct direction?
• Check the "Signal strength" and "Quality" (Page 17).
• Are physical objects blocking the antenna?
• Is the antenna or antenna cable compatible with DTV broadcast?
E202 • Is the DTV antenna set up properly?
• Is the antenna cable connected properly? (Page 9)
• Is the channel settings correct? (Page 17)
— • Check the "Signal strength" and "Quality" (Page 17).
E203 • Check the current broadcast.
Possible solution
Possible solution