Hp 5900Af-48Xgt-4Qsfp+ Panel Views - HP 5920 Series Installation Manual

The HP 5900AF-48XG-4QSFP+ and 5900AF-48XG-4QSFP+ TAA switches also come with the fan tray
slots empty. You must install two fan trays for the 5900AF-48XG-4QSFP+ and 5900AF-48XG-4QSFP+
TAA for adequate heat dissipation, and their models must be the same. In this figure, two LSWM1FANSC
fan trays are installed. For more information about installing and removing the fan tray, see
"Installing/removing a fan
Figure 6 HP 5900AF-48XG-4QSFP+/HP 5900AF-48XG-4QSFP+ TAA left side panel
(1) Primary grounding point

HP 5900AF-48XGT-4QSFP+ panel views

Figure 7 HP 5900AF-48XGT-4QSFP+ front panel
(1) 1/10GBase-T autosensing Ethernet port
(3) QSFP+ port
(5) System status LED (SYS)
Figure 8 HP 5900AF-48XGT-4QSFP+ rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Console port
(5) Fan tray slot 2
(7) Power module slot 2
(9) ACT LED for the management Ethernet port
The HP 5900AF-48XGT-4QSFP+ switch comes with the power supply slots empty and the filler modules
for the slots as accessories. You can install one or two power supplies for the switch as needed. In
tray."
4
(2) Auxiliary grounding point 1
(2) 1/10GBase-T autosensing Ethernet port LED
(4) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power module slot 1
(8) LINK LED for the management Ethernet port
(10) USB port
Figure