10/100/1000Base-T Autosensing Ethernet Port; 1/10Gbase-T Autosensing Ethernet Port - HP 5920 Series Installation Manual

Figure 52 40G QSFP+ to 4 x 10G SFP+ cable
(1) QSFP+ module
(3) SFP+ side pull latch
NOTE:
To guarantee the functionality of the QSFP+ ports, use only HP QSFP+ transceiver modules and cables.
•
The QSFP+ transceiver modules and cables available for this switch series are subject to change over
•
time. For the most up-to-date list of SFP transceiver modules, consult your HP sales representative or
technical support engineer.
For QSFP+ transceiver module and cable specifications, see Transceiver Modules User Guide.

10/100/1000Base-T autosensing Ethernet port

Every HP 5900AF-48G-4XG-2QSFP+ switch has 10/100/1000Base-T autosensing Ethernet ports.
Table 12 10/100/1000Base-T autosensing Ethernet port specifications
Item
Connector type
Port transmission rate
Transmission
transmission distance
Compatible standards

1/10GBase-T autosensing Ethernet port

Every HP 5900AF-48XGT-4QSFP+ switch has 1/10GBase-T autosensing Ethernet ports.
Table 13 1/10GBase-T autosensing Ethernet port specifications
Item
Connector type
Port transmission rate
Specification
RJ-45
10/100/1000 Mbps, half/full duplex, MDI/MDI-X autosensing
medium and max
100 m (328.08 ft) over category-5 twisted pair cable
•
•
•
Specification
RJ-45
1/10 Gbps, full duplex, MDI/MDI-X autosensing
(2) QSFP+ side pull latch
(4) SFP+ module
IEEE 802.3i
IEEE 802.3u
IEEE 802.3ab
49